The Truth About Paint-Free Anti-Slip Treatments: What Hotels Need To Know

DON’T BE FOOLED

Hotels are often sold on the idea of quick, low-cost anti-slip treatments that promise minimal downtime marketed as “paint-free” or acid etching solutions.  While this may sound appealing, the truth is these methods are ineffective and dangerous.

The Real Problem?

These treatments rely on hazardous chemicals like Hydroflouric Acid in an attempt to re-create the nonslip surface that has been worn away over time.

Why It Doesn’t Work:

The most popular tubs installed in hotels are made of a molded piece of thin Sheet Metal coated with a non-porous high gloss enamel and a manufactured non-slip bottom.

Non-Porous Surfaces CANNOT BE ETCHED

THE RISKS YOU DIDN’T KNOW YOU WERE TAKING

Minimal to Non-existent Results

The non-slip surface you’re trying to re-establish deteriorates almost immediately, and your tubs will become slippery again in no time

Tub Damage

All it takes is One treatment of Hydroflouric Acid to destroy the glossy enamel coating. Daily cleaning and scrubbing of the now damaged surface will be the cause of the the tub to appear dirty looking.

Safety Issues

Exposure to this corrosive chemical can pose sever health risks to guests and your staff.  These risks may include tissue damage or burns to skin on contact if the chemical is not thoroughly rinsed from the surface. Lingering vapors or fumes can cause respiratory issues or poisoning.

WHY WOULD ANY COMPANY SELL THIS SERVICE?

IT’S A MARKETING TRAP

“Paint Free” is a classic bait–and–switch tactic.

The promise of no downtime might sound like a revenue saver, but once the Paint Free treatment fails (and it will) your hotel will have no choice but to pay for a more expensive service to get the protection you were looking for to begin with and to restore that “Like New” appearance you once had.

Does this look familiar? This tub surface was damaged by a paint free treatment.

HERE’S WHY WE’RE DIFFERENT

We don’t believe in cutting corners

  • We use the highest quality industrial coatings
  • Coatings are water based – NO obnoxious odors
  • Proprietary bonding primers for the longest lasting finishes
  • Non – slip coating applications certified by NFSI
  • We will never ruin your tub with a “Paint Free service
  • We have always maintained and emphasized quality over quantity

Trust MAK Resurfacing to get it right the first time.